/*!
    \file  readme.txt
    \brief description of DAC0_LFSR_noise_mode example
*/

/*
    Copyright (C) 2017 GigaDevice

    2017-02-10, V1.0.0, firmware for GD32F30x
*/

  This example is based on the GD32F30x-EVAL board, it shows how to use DAC0 to generate
LFSR noise wave. TIMER5 is chosen to trigger DAC0. The DAC0 output pin is configured PA4. 
The LFSR noise wave can be observed through the oscilloscope.
